Cherry Mobile Fusion Bolt upgraded to Ainol Novo 7 Rom

               I do not own a cherry mobile fusion bolt but according to many users the default/stock rom installed in FuBo has many bugs and it seems to be more likely a generic software driver installed to a computer or laptop. I successfully tried/port it into my cousin's fusion bolt. The specifications are also good and it is only Php 3,999 really cheap for a tablet with a quad core cpu. Back to the topic, i found a tutorial on how to upgrade or change the default f**k*ng rom to Ainol Novo 7. Same specs and said to be the original model re-branded here in the Philippines Fusion Bolt. But remember guys by changing the fw the warranty of your phone will be void and failure to follow the procedures correctly may lead to semi-brick unit. So be sure and carefully follow each and every steps. I am not responsible for any damage that this tutorial may cause to your FuBo. Try it at your own risk. Here we Go!

PROCEDURES :

1. Extract the flash tool and install (download link provide below)

2. Turn off the Fusion Bolt tablet and be sure it is disconnected from your PC.

3. Press and hold the “Volume Up/+” key while connecting the tablet on your PC via USB.

4. Your PC wont be able to detect the proper drivers, it will ask for the drivers of the detected unknown device. Point it to the “\Hero 4 nuclear upgrade tool\Driver\” folder from the extracted “Firmware Update Tool” folder. Allow it to install the requested drivers.

5. In case you missed the part where your PC should be asking for the drivers, run the Device Manager (just search it on Windows) and then update the driver file with (!) exclamation mark proceeding with the mentioned directory above.

6. Run the Firmware Update Tool and open the jellybean_atm7029_7_a_130203.fw file from the extracted firmware folder (download link provide below)

7. Select all the three .img files namely: misc.img, rec.img, and system.img. This part is very important, be sure to select all those three as failing to do so will leave your Fusion Bolt/Ainol Novo tablet unable to boot.

8. When everything is ready, click the DOWN button and wait until it the flashing is 100% done, a note of successful flashing will show.

9. Disconnect the Fusion Bolt/Ainol Novo and let it boot. Booting for the first time takes longer than the usual boot time, just be patient.

Enjoy your Cherry Mobile Fusion Bolt running the Ainol Novo7 Venus 4.1 firmware (v0428)

Download links :

Click here to download the Ainol Novo 7 FW

Click here to download the Flastool